Trying Out the Switch Unit
R&S
®
OSP
35
Getting Started 1178.7117.02 ─ 03
6.5
Manual Module Operation
This chapter outlines only the most basic features of the dialogs for man-
ual "Module Operation" that allow immediate interaction with the relays.
Click to either see a
list
of all installed switch modules or to see the
interaction dialog
of one switch module:
Table 6-1: List of installed modules (left), interaction dialog of one switch module (right)
If you see the interaction dialog of one switch module, click to see the list of
installed modules. Then click the name of any module to see its interaction dialog.
6.5.1
Switching Mode
As long as the selection mode (see
) is deactivated, click the icon of
a relay or channel to change its state:
Figure 6-7: Various relay types and the effect of clicking them
●
(A) SPDT relays, and (B) DPDT relays: Clicking toggles the state
●
(C) SP6T relays, and (D) SP8T relays:
Clicking a terminal port selects it to be connected to the common port
●
(E) Output channels: Clicking toggles the state
Manual Module Operation
