The R&S
®
OSP is a high-performance switch platform from Rohde
&
Schwarz. It
facilitates RF tests by eliminating the need to rearrange coaxial cable connections
repeatedly during measurements. Instead, the application-specific modules in the
base unit automatically switch the required signal paths.
This document describes the following R&S
®
OSP base units:
●
R&S
®
OSP220
Base Unit 2HU without Touchscreen (order no. 1528.3105.02)
●
R&S
®
OSP230
Base Unit 2HU with Touchscreen (order no. 1528.3105.03)
●
R&S
®
OSP320
Base Unit 3HU without Touchscreen (order no. 1528.3111.02)
●
R&S
®
OSP-B200S2
Satellite 2HU for Base Units (order no. 1528.3134.02/.04)
For all optionally available standard switch modules, refer to the User Manual,
which is available for download at https://www.rohde-schwarz.com/product/osp >
Manuals
The software contained in this product uses several valuable open source software packages. For infor-
mation, see the "Open Source Acknowledgment" document, which is available for download from the
R&S
OSP product page at https://www.rohde-schwarz.com/product/osp > Firmware.
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embed-
ded computing.
© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email:
Internet:
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1178.7117.02 | Version 03 | R&S
®
OSP
In this manual, products from Rohde & Schwarz are indicated without the
®
symbol, e.g. R&S
®
OSP is indi-
cated as R&S
OSP.
