R&S OSP Series, Начало работы

Страница: 19 / 37

Preparing for Use
R&S
®
OSP
19 Getting Started 1178.7117.02 ─ 03
4.6 Checking the Installed Modules
The instrument is typically equipped with one or more optional switch modules.
You can visually check whether the modules listed on your delivery note corre-
spond with the installed modules. Each module's name is printed on its panel.
You can also view the installed modules in the "Module Operation" dia-
log (touchscreen display or "WebGUI", see
Chapter 6.2, "User Interface
and Functional Elements" , on page 31):
Figure 4-1: The module operation dialog, here with a master switch unit and 5 modules
The information in this dialog is updated during the booting process, when the
R&S
OSP automatically detects the installed modules.
4.7 Configuring the Initial Instrument Settings
After startup, the switch unit is fully configured automatically, and ready for use.
However, you have many options to change the configuration, for example:
●
Edit the network settings
●
Define or modify a master-slave setup
●
Restore a previous setting
●
Define switching paths and output channels
These configuration settings and many more are described in the User Manual.
Configuring the Initial Instrument Settings