R&S NRX-B4, Руководство пользователя

Страница: 91 / 450

Measurement Types and Result Displays
R&S
®
NRX
91 User Manual 1178.5566.02 ─ 05
Fence
Enables or disables an exclusion interval in the timeslots. This exclusion interval is
called fence. The fence is defined by its start time and its length.
Remote command:
CALCulate<Measurement>[:POWer]:TSLot[:AVG][:EXCLude]:MID[:STATe]
on page 250
Start of Fence
Sets the start time of the fence. The start time refers to the start of the timeslots.
Remote command:
CALCulate<Measurement>[:POWer]:TSLot[:AVG][:EXCLude]:MID:TIME
on page 249
Length of Fence
Sets the length of the fence.
Remote command:
CALCulate<Measurement>[:POWer]:TSLot[:AVG][:EXCLude]:MID:
OFFSet[:TIME]
on page 249
8.7 Statistics
Supported by wideband power sensors. The power sensor measures power over time.
Using the statistics measurement type, you can analyze the statistical distribution of
the envelope power. The duration of the sampling window is either defined by the
chosen gate or a set aperture time. The measurement is repeated until the minimum
number of samples is collected.
● Statistics Result Display ..........................................................................................91
● Statistics Settings ....................................................................................................93
● Measurement Settings Dialog .................................................................................93
● Scale Configuration Dialog ......................................................................................95
● Statistics Timing Dialog ...........................................................................................96
8.7.1 Statistics Result Display
You can choose between a tabular or graphical result display.
In the lower pane, the following measurement results are provided for the 2 traces:
●
"Peak"
Peak power
●
"Avg"
Average power
●
Measurement result at the x-marker position. The marker is set using [dBm] / [dB]
marker .
●
Statistics