Instrument tour
R&S
®
NGE100B
21
Getting Started 5601.1337.02 ─ 08
AC inlet with fuse holder (8)
Main supply cord
Do not use detachable mains supply cord with inadequate rating.
For safety reasons, the instrument can only be operated with authorized safety
sockets.
The power cable must be plugged in before signal circuits can be connected.
Never use the product if the power cable is damaged. See
on page 22 for more information.
Voltage selector (9)
Setting voltage selector
The voltage selector is located at the bottom of the R&S NGE100B.
On your first power-on connection, a yellow label sticker is attached over
the
. Before peeling off the yellow label sticker, make sure the cor-
rect fuse rating is used for the mains voltage.
To set the correct fuse rating, slide the selector according to the voltage
selector label.
1
2
Figure 6-3: Voltage selector
1 = Voltage selector
2 = Voltage selector label
Overview of controls
