Instrument tour
R&S
®
NGE100B
22
Getting Started 5601.1337.02 ─ 08
The voltage selector selects the mains voltage between 115 V and 230 V. See
Ethernet connector (10)
This connector is used for establishing remote control via SCPI or LXI. See sec-
tion "Ethernet Setup" in the user manual for more information on the connection
setup.
The Ethernet option R&S NGE-K101 must be installed for this function to be
available in the instrument.
USB connector (11)
The USB connector is a Type-B connector for remote control operation via USB
TMC or USB VCP.
Digital I/O connector (12)
The Digital I/O connector is a 5-pin terminal block for external trigger input or out-
put.
Measurement control can be achieved by means of an external input signal or as
an output signal to trigger other instruments for some measurements.
The Digital Trigger I/O option (R&S NGE-K103) must be installed for this function
to be available in the instrument.
Kensington security slot (13)
A Kensington lock can be anchored to the R&S NGE100B power supply housing
to secure it to a workstation mechanically.
6.2
Switching on the instrument
Before switching on the instrument, check that all the instructions in the “Basic
Safety Instruction” brochure and safety measures in previous sections are
observed.
Also, check if the value on the voltage selector corresponds to the mains voltage
(115 V or 230 V).
Switching on the instrument
