Putting into Operation
R&S FSH
1145.5973.12 1.10
E-14
Country-Specific Settings
The R&S FSH is “multilingual” and can display text in the language of your choice. The softkey lettering
is always in English. The default setting (factory-setting) is also English.
Selection
Press the SETUP key.
The R&S FSH displays all default settings. The last
two lines indicate the current language and the date
format.
Press the LOCAL SETTINGS softkey.
A submenu with the LANGUAGE..., DATE FORMAT...
and UNIT OF LENGTH... entries opens. This menu
allows the entry of a country-specific language, date
format or the unit of length used by the R&S FSH.
Using the rotary knob or cursor keys, select the
LANGUAGE... you want from the menu and confirm
with the ENTER key or by pressing the LOCAL
SETTINGS softkey again.
The languages available are displayed in a submenu.
The selected language is highlighted in red.
Using the rotary knob or cursor keys, select the
language you want.
The originally selected language is highlighted in
green. The red bar indicates the new selection.
Confirm the new selection with the ENTER key or by
pressing the LOCAL SETTINGS softkey.
Using the rotary knob or cursor keys, select DATE FORMAT... from the menu and confirm with the
ENTER key or by pressing the LOCAL SETTINGS softkey again.
Using the rotary knob or cursor keys, select the date format (dd/mm/yyyy or mm/dd/yyyy) and
confirm with the ENTER key.
Using the rotary knob or cursor keys, select UNIT OF LENGTH... from the menu and confirm with the
ENTER key or by pressing the LOCAL SETTINGS softkey again.
Using the rotary knob or cursor keys, select the required unit of length (METER or FEET) and
confirm with the ENTER key.
Note:
The unit of length is relevant only with distance-to-fault cable measurements in order to
display the fault distance from the measurement plane.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com