![background image](http://html1.mh-extra.com/html/rands/fsh3/fsh3_operating-manual_3151881154.webp)
Power measurements on TDMA signals
R&S FSH
1145.5973.12 4.42
E-14
Press the STANDARD softkey.
Using the rotary knob or the cursor keys, select the
USER menu item.
Confirm your selection with the ENTER key or the
STANDARD softkey.
The USER STANDARD settings that have already
been stored are set on the R&S FSH. When the USER
STANDARD is called for the first time, it sets the
measurement parameters for the GSM/EDGE
standard.
If the USER STANDARD is set, the R&S
FSH
automatically accepts all measurement parameter
changes so that they are available next time USER
STANDARD is selected.
Renaming the USER standard:
The setting for the USER standard can be assigned a user-defined name. The name entered as the
USER standard also appears on the screen, thus making it possible to document the setting along with
the measurement.
Press the STANDARD softkey.
A table with the available standards opens.
Select Rename USER with the rotary knob or the
cursor keys.
Confirm your selection with the ENTER key or the
STANDARD softkey.
The R&S FSH will open the input window for the name
of the USER standard.
Using the numeric keys, enter a name.
Press the ENTER key to complete the entry.
When the STANDARD menu is called, the entered
name appears under USER (e.g. TETRA (USER)).
The name also appears at the upper right-hand corner
of the screen after the USER standard is selected.
Using the R&S FSH View control software, additional standards can be generated and permanently
loaded into the R&S FSH. You can also delete the factory-set standards provided in the instrument if
you do not need them. The R&S FSH then offers only the standards you require.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com