R&S ESR, Начало работы

Страница: 64 / 112

Basic Operations
R&S
®
ESR
64 Getting Started 1316.3749.02 ─ 09
6.3.2 Entering Alphanumeric Parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to
enter numbers and (special) characters (see also
Chapter 6.2.3, "On-screen Key-
board" , on page 56).
Figure 6-2: On-screen keyboard
Alternatively, you can use the keypad. Every alphanumeric key provides several
characters and one number. The decimal point key (.) provides special charac-
ters, and the sign key (-) toggles between capital and small letters. For the
assignment refer to
Table 6-2 .
Entering numbers and (special) characters via the keypad
1. Press the key once to enter the first possible value.
2. All characters available via this key are displayed.
3. To choose another value provided by this key, press the key again, until your
desired value is displayed.
4. With every key stroke the next possible value of this key is displayed. If all
possible values have been displayed, the series starts with the first value
again. For information on the series refer to
Table 6-2 .
5. To change from capital to small letters and vice versa, press the sign key (-).
6. When you have chosen the desired value, wait for 2 seconds (to use the
same key again), or start the next entry by pressing another key.
Entering a blank
► Press the "Space" bar, or press the "0" key and wait 2 seconds.
Setting Parameters