The information furnished in this manual does not include all of the details of design and engineering of
this particular product; not does it cover every possible application or situation concerning its usage,
which may occur during the installation, operation or maintenance of said DSC36 product.
IMPORTANT
THE PRODUCT REQUIRES
CLASS 2 OUTPUT WIRING.
TO PREVENT ELECTRIC SHOCK, DO NOT
REMOVE TOP OR BOTTOM COVERS. NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL. DISCONNECT POWER CORD
BEFORE REMOVING REAR PANEL COVER
TO ACCESS GAIN SWITCH.
Shock Hazard - Do Not Enter
Choc Hasard - N*entrent
Schocke Hazard - Test Nicht
Betrete
Urto Hazard - Do Non Entrano
WARNING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
The exclamation point triangle is used
to alert the user to important operating
and/or maintenance instructions.
Printed on
recycled paper.
CAUTION
Magnetic Field
CAUTION:
Do not locate sensitive high-gain equipment such as preamplifiers or tape decks
directly above or below this unit. Because this amplifier has a high power density, it has a
strong magnetic field which can induce hum into unshielded devices that are located nearby.
This field is strongest just above and below the unit. If an equipment rack is used, we
recommend locating the amplifier(s) at the bottom of the rack and the preamplifier or other
sensitive equipment at the top.
The lightning bolt triangle is
used alert the user to the risk
of electric shock.
Page 2
Page 15
User's Manual
User's Manual
FEATURES:
Inputs
* 3 x XLR IN, electronically balanced
* Input voltage (MAX) 7.55 V / + 20dBu
* 6 bands parametric equalizers, 16 shelving equalizer
* 6 bands Low-Shelving equalizer, Hi-Shelving equalizer
* Input impedance 20 kohms
* Common mode rejection > 70 dB (1kHz)
* AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase
Outputs
* 6 x XLR OUT, electronically balanced
* Output voltage (MAX) 7.55 V / + 20dBu
* 6 bands parametric equalizers, 16 shelving equalizer
* 6 bands Low-Shelving equalizer, Hi-Shelving equalizer
* Output impedance < 100 ohms
* Min. load impedance 600 ohms
* DA-conversion 24-bit, Sigma-Delta, 128 times oversampling
* Frequency response 20 Hz - 20 kHz (- 0.5 dB)
* S/N ratio 110 dB (typical)
* Distortion < 0.01 %
4. Technical Specifications
DSC36
DSC36
