background image

ELITE SERIES USER MANUAL             

 ENHANCED CP/M UTIL.

1 0 . 1 . N o t a t i o n

Since almost all of the various different com-

mands which you can give to the enhanced CP/M 

utilities contain choices and options, it is 

necessary to define a syntax notation. This 

notation permits the extensive amount of mater-

ial covered by this section to be reduced to as 

small an amount of verbiage as possible.

[ ]

Square brackets surround those items 

which are optional. The items can be 

used as part of the command sentence, 

or completely left out.

< >

Angle brackets are used to surround 

lower case letters or words which are 

meant to describe only one item. The 

letters or words enclosed infer the 

type of “thing” that is supposed to be 

plugged in” at that location in the 

command, and not the exact letters 

which should be typed. (<filename>)

Angle brackets are also used to sur-

round upper case letters or words. In 

this case, the letter or word is an 

actual key on the keyboard which is to 

be typed. (<RETURN>)

{ }

Braces enclose lists of items from 

which you must choose one (and only 

one). If the items in the list are also 

enclosed the square brackets, then it 

is permissable to select none.

P a g e   1 0 — 3

Содержание RanaSystems 13-0010--001









































































































































































































































































































































Отзывы: