RANA Systems RanaSystems 13-0010--001 Скачать руководство пользователя страница 214

Страница: 214 / 328

ELITE SERIES USER MANUAL

ENHANCED DOS UTIL.

Elite Three is used in the copy process when not

performing a straight Elite Three to Elite Three

copy.

It is possible to use the Elite Three as the

source drive for all types of diskette copies.

This goes right along with the standard Elite

Three usage rule that it can read any of the

lesser storage capacity diskettes.

When the Elite Three is used as the destination

drive, a very special point needs to be remem-

bered. The resultant destination (duplicate)

diskette will not be compatible with its as-

sociated drive type, unless the diskette and

drive type is Elite Three. Once again, this

comes from the fact that the Elite Three is not

write compatible with non-Elite Three drives.

This is not to say that the Elite Three can’t be

used as the destination drive in a non-Elite

Three copy. This simply means that the

resultant diskette will only be readable by an

Elite Three drive.

After all the source drive and diskette

questions have been answered, CLONE will move on

to the destination (duplicate) drive and

diskette information:

DESTINATION:

SLOT NUMBER (1-7)? <ds>

<ds> is the default answer you will BE

specifying if you just press <RETURN>. If <ds>

is not the slot number you want for the

P a g e 9 - 1 7

Содержание RanaSystems 13-0010--001









































































































































































































































































































































Результаты поиска

Содержание RanaSystems 13-0010--001

Отзывы:

Бренды по названию

Популярные бренды

RANA Systems RanaSystems 13-0010--001, Руководство пользователя

Результаты поиска

Содержание RanaSystems 13-0010--001

Отзывы:

Бренды по названию

Популярные бренды