manualshive.com logo in svg

RANA Systems RanaSystems 13-0010--001, Руководство пользователя

Поделиться
Скачать
RANA Systems RanaSystems 13-0010--001 Скачать руководство пользователя страница 39

ELITE SERIES USER MANUAL              DOS ENHANCEMENTS

Once ENHANCE has displayed its message, insert 

the other INITialized diskette and press (Elite 

Three only):

     <RETURN>

to tell ENHANCE to go ahead and read a copy of 

DOS off of that diskette.

ENHANCE will then tell you when it is ready to 

write the modified DOS hack out to the diskette, 

and wait for you to press <RETURN>. Go ahead   

and press (Elite Three Only):

     <RETURN>

When done, ENHANCE will again return you to the 

BASIC prompt. This second enhanced diskette 

should he labelled “unconfigured enhanced system 

master” (Elite Three only).

Place (or leave) “configured master” in the 

drive, then type (all drives):

   PR#6<RETURN>

To reboot your Apple using the enhanced DOS.

Once again, the drive will rattle and spin for a 

moment; and then you will get:

   FILE NOT FOUND

This message occurred because you deleted the 

hello file from the diskette earlier during  

these instructions. That way, these instruc—

  

P a g e   3 - 1 4

Содержание RanaSystems 13-0010--001









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды