Instruction Manual – Ramsond CUT series plasma cutters Rev 10-0993
© Copyright Ramsond Corporation. All rights protected. Unauthorized reproduction prohibited.
Page 15
4.2
OPERATING ENVIRONMENT
1. The Ramsond CUT can perform in environments where conditions are particularly harsh
and with outside temperature between -10 and +40 degree centigrade with a maximum
humidity level of 80%.
2. DO NOT USE THE MACHINE IN WET / RAINING CONDITIONS. KEEP MACHINE
DRY AND AVOID ENTRY OF WATER INTO MACHINE.
3.
TURN MACHINE OFF WHEN DRAINING THE MOISTURE FROM AIR REGULATOR
FILTER.
4. DO NOT USE THE MACHINE IN CONDITIONS PRESENTING HIGH
CONCENTRATIONS OF DUST OR CORROSIVE GAS.
4.3 MAINTENANCE
WHENEVER SERVICE OR INSPECTION OF MACHINE IS CONDUCTED, DISCONNECT UNIT
FROM POWER SOURCE AND LET UNIT COOL DOWN.
AFTER EACH USE
CLEAN AND INSPECT TORCH CUP, TIP, SWIRL RING, AND REVERSIBLE
ELECTRODE. MAKE SURE UNIT IS DISCONNECTED FROM THE POWER
SOURCE. MAKE SURE UNIT IS OFF. AND HAS AMPLE TIME TO COOL DOWN.
REPLACE CONSUMABLES WHEN NEEDED
INSPECT AIR REGULATOR AND PRESSURE GAUGE
EVERY 3 MONTHS OF USE
SERVICE AIR REGULATOR / FILTER
INSPECT LABELS AND ENSURE THEY ARE READABLE
INSPECT AIR HOSES AND CABLES FOR CRACKS OR BREAKS
INSPECT TORCH HANDLE AND CONSUMABLES
REPLACE ANY WORN OR BROKEN PARTS
EVERY 6 MONTHS OF USE
SERVICE AIR REGULATOR
SERVICE AIR REGULATOR
INSPECT LABELS AND ENSURE THEY ARE READABLE
INSPECT AIR HOSES AND CABLES FOR CRACKS OR BREAKS
INSPECT TORCH HANDLE AND CONSUMABLES
VACUUM OUT AIR VENTS AND FAN
EXTENDED USE WILL REQUIRE MORE ROUTINE MAINTENANCE