manualshive.com logo in svg

RAMMER 1533E, Руководство оператора, Страница: 36 / 74

Поделиться
Скачать
RAMMER 1533E Скачать руководство пользователя страница 36

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY

Page 36 - Operation

Operation

1533E STD

5.3  MOUNTING AND DISMOUNTING THE HAMMER

 REMOVAL FROM CARRIER

Warning! The hammer must be secured from rolling over when disconnecting
from the carrier. Only use a skilled operator to position the carrier for hammer
removal!

Warning! Hydraulic pressure inside the hammer must always be released
before opening hose connections!

Warning! Hot hydraulic fluid can cause severe injuries!

1. Position hammer horizontally on the floor. If the hammer is going to service,

remove the tool.

2. Stop the carrier engine. Operate boom and hammer controls to release pressure

trapped inside hoses. Wait ten minutes for oil pressure to drop.

3. Close hammer inlet and outlet lines. If quick couplers are used, disconnection

automatically closes hammer lines. If hammer line includes ball valves, please
make sure that they are closed.

4. Disconnect hoses. 

NOTICE! Protect environment from oil spills

. Plug the

hoses and the hammer inlet and outlet ports to keep dirt out from hydraulic
circuit.

5. Remove bucket pins and other parts.

Содержание 1533E











































































Отзывы:

Нет отзывов