manualshive.com logo in svg

RAMMER 1533E, Руководство оператора, Страница: 27 / 74

Поделиться
Скачать
RAMMER 1533E Скачать руководство пользователя страница 27

Operation - Page 27

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY

Operation

1533E STD

 CHOOSING TOOLS

A selection of standard and special tools to suit each application are available. The
correct type of tool must be selected to get the best possible working results and
longest life time for the tool. Choosing the best tool type for an application may
require some testing, please consult with your local dealer. See “Tool
specifications” on page 70.

 Chisel, moil point and pyramid

■

For sedimentary (e.g. sandstone) and weak metamorphic rock into which the
tool penetrates.

■

Concrete.

■

Trenching and benching.

 Blunt tool

■

For igneous (e.g. granite) and tough metamorphic rock (e.g. gneiss) into which
the tool doesn't penetrate.

■

Concrete.

■

Breaking boulders.

It is important to choose a tool, which is suitable for your hammer and for the
application you are working on. The tool selection available depend on hammer
model. See “Tool specifications” on page 70.

Содержание 1533E











































































Отзывы:

Нет отзывов