6
The battery charger will hold and charge two battery packs at one time.
Charger will function with one or two battery packs installed.
Wait to attach battery cables until LED lights are off.
Align battery pack with holder and drive battery into position until a loud click is heard.
Attach charging cables to the battery pack(s).
Battery charger will determine if batteries are attached, measure & report battery charge/
fuel level, and initiate a charge cycle.
Typical charge time for a fully discharged battery is approximately 3 hours. Partially
discharged batteries will take less time.
Battery Pack Installation
Battery Charger comes with a 12 month limited warranty. This does not cover damage
due to improper handling. For information please visit
www.RAMFAN.com.
The customer service department will answer your questions regarding repairs and
maintenance for your product as well as regarding spare parts and operation. You can also
find further information at
www.RAMFAN.com.
Warranty
Customer Service and Advice
Disposal
Charging devices, accessories and packaging should be recycled in
an environmentally-friendly manner.
Only for EU countries: Do not dispose of charging devices in
household waste. In accordance with the European Directive
2012/19/EC on Waste Electrical and Electronic Equipment and its
implementation into national law, unserviceable chargers should
be collected separately and recycled in an environmentally-friendly
manner.
Environmentally Safe Battery Disposal
Battery pack(s) contain Li-ion, a toxic material. All toxic materials must
be disposed of in a specified manner to prevent contamination of the
environment. Before disposing of damaged or worn out Lithium-ion battery
packs, contact your local waste disposal agency, or the local Environmental
Protection Agency for information and specific instructions. Take the batteries
to a local recycling and/or disposal center, certified for Li-ion disposal.
7
DECLARATION OF CONFORMITY
BATTERY CHARGERS
Year of Manufacture: 2019
Manufacturer: Euramco Safety, Inc.
2746 Via Orange Way
Spring Valley, Ca. 91978 USA
Equipment Description: R25515 – Universal AC Input, 42VDC @ 3 Amp Output
R25515DC – 12-24VDC Input, 42VDC @ 1.5 Amp Output
M16515 – Universal AC Input, 54.6VDC @ 3 Amp Output
M16515DC – 12-24VDC Input, 54.6VDC @ 1.5 Amp Output
BPV-12CE – 12V Battery Charger (EURO)
European Directives: 2006/42/ EC – Machinery Directive
2014/30/EU – EMC Directive
2014/35/EU – Low Voltage Directive
Standards to which this Conformity is Declared:
BS EN ISO 13857:2008 – Safety Distances
BS EN ISO 12100:2010 – Safety Machinery
BS EN 6100-6-4:2007+A1:2011 – EMC Industrial Generic Emission
BS EN 6100-6-2:2005 – EMC Immunity/Industrial Environments
Euramco Safety, Inc. hereby declares that the equipment described above conforms to the relevant
Essential Health & Safety Requirements of the European Machinery Directive
2006/42/EC, and the
Additional Directives and Standards listed above.
DATE 07/29/2019
___________8/21/2018_________________
CERTIFICATIONS
CERTIFICATIONS
UN/DOT
38.3
IEC
62133
CNAS
WEEE
EC Declaration of Conformity
