background image

5

RULES FOR SAFE RIDING

You must ensure that you understand the safe oper-

ation of this bike and follow all traffic and bike laws 

and regulations in the area in which the bike is being 

operated. These may include rules regarding helmets, 

reflectors, and lights.

A few important general rules for riding include but 

are not limited to:

Wear a helmet that 

meets CE or CPSC 

safety testing re-

quirements

- Have reflectors 

and lights installed 

on your bike

- Use proper hand 

signals

- Avoid loose 

clothing

- Ride on the cor-

rect side of the roadway with flow of traffic

- Always wear bright color and reflective clothing

- Ride single file if riding with others

- Obey all traffic laws and regulations

- Watch for parked car doors opening unexpectedly

- Watch for pedestrians stepping out, pets and chil-

dren playing near

roadways

- Never carry a passenger

- Never ride with earbuds or headphones

- Always obey traffic signals

- Use caution when crossing railroad tracks and care-

fully cross at a 90 degree angle

- Mount a horn or bell on to your bike to signal oth-

ers of your approach

Before riding fast or in more difficult conditions, try 

riding at slower speeds in a flat, open lot to test the 

function and performance features on your bike. 

Consult your local bike shop if you have specific 

needs on parts and functionality of your bike. Many 

areas offer cyclist courses or classes which can be 

found online or through your local bike shops.

Wet Weather Conditions

Use extra caution when riding in wet weather. Your 

brakes stopping power will be diminished in wet 

conditions no matter what type of brake system 

you have, all are affected by wet weather. In order 

to ensure you can stop safely in wet conditions, ride 

more cautiously and slowly and brake earlier than 

you would in normal road and weather conditions. 

Never ride in storms with high winds and lightening 

conditions.

Night Riding and Poor Visibility

Riding at dawn, dusk, during poor visibility or night 

riding is extremely dangerous. Your reflectors are not 

a substitute for required bike lights. Motorists and 

pedestrians may not be able to see a bicyclist during 

poor visibility conditions. Consult your local bike 

shop for night riding equipment if you choose to 

accept the risk of riding during these conditions.

Unsafe Riding

While not all accidents can be avoided the list below 

is just a few examples of things you can do to help 

decrease your risk of serious injury or death.

- Pay attention and avoid distractions while riding

- Maintain both hands on the handlebars at all times

- Avoid bike stunts and/or aggressive riding

- When carrying gear make sure it is securely at-

tached to your bike and/or rack.

- Never strap or lash any item to your bike in an area 

not designed to carry gear.

- Only carry gear on your racks and within the stan-

dard weight limits of the rack.

- Do not ride while intoxicated or using medications 

which might make you drowsy.

- Never carry a passenger while riding

WARNING

!

Riding a bicycle in low light conditions without 

proper lighting and reflectors attached to your bike 

impairs your ability to see and be seen by other 

motorist or pedestrians. This greatly increases the 

chance you will be involved in an accident that 

could lead so serious injury or death. use a light 

on the front and rear of your bike and be sure all 

reflectors are in place before riding in low light 

conditions. 

WARNING

!

Certain types of riding significantly increase stress-

es and abnormal wear and tear on your bike.

. competition or stunt riding

. downhill racing/riding

. jumping your bike 

the above list is just a few of the types of riding that 

can adversely affect your safety and lifespan of your 

bicycle and its components.

Содержание R750


























Отзывы: