background image

18

Section 7 - C961 Dispaly Control-

ler

Material & color

C961 made of ABS is able to work well under -20 to 

60 degree Celsius

Available color: Black and white.

Function

C961 gets many functions for your enjoying riding.

Show context:

◆Capacity

◆Speed (Speed/ MAX/AVG)

◆Distance (TRIP/ TOLTAL)

◆Time

◆ Assist walking

◆Backlight

◆Error code

◆Levels setting

Interface

Button

C961 gets three buttons:

Attention:

Don’t plug in/out this display when power on.

Avoid collision.

Keep the membrane for waterproof perfor-

mance.

Don’t abuse parameters resetting, in case out 

of working.

P

ower

Mode

Level

Walking

Time

Speed

Unit

Distance

Unit

TRIP

ODO

M
+

-

Call service if display out of working

ON/OFF

Long press Mode to start 

display. Long press M again

to switch off.

Display off automatically after 

no any operation on

vehicle for ten munites (default).

Walking assist

Long press (-), to start assist walking. highlights

on scree. Vehicle goes at 6km/h.

Only in case of pushing, can this function be used.

Please don’t abuse when riding.

Backlight

Long press (+) to switch on backlight on scree, and 

front light on as well if front light available. Long 

press (+) again to switch it off.

Note: Automatical backlight is available if controller

gets this function.

Backlight & front light on automatically according

to the lightness outside if controller gets light sensor

inside. Automatical function off when manual oper-

ation on.

Level

Press (+) or (-) to change the levels. Default range 0 - 

6, 0 no output, 6 max output. Default level 1 when

switch on.

Capacity

Four sections highlights when battery is full.

Percentage of capacity for sections:

    <20%     20%-40%   40%-60% 60%-80% 80%-100%

Frame flashes at 1 Hz when low power.

Distance

Press M to shift TRIP and TOTAL.

  

TRIP clearance

Power on, long press M and (-) to clear TRIP dis-

tance.

Error code

When something goes wrong with system, error

code will flash on scree. Check details on attached 

M
+

-

Содержание R750


























Отзывы: