RAM TRX 2023, Руководство по функциям

Страница: 79 / 104

IN CASE OF EMERGENCY 77
3. Remove the extension with the hook and
reattach the short extension 5
Ú
page 70.
Attach the lug wrench to the extension tubes
with the curved angle facing away from the
vehicle. Insert the extension tubes through the
access hole between the lower tailgate and
the top of the fascia/bumper and into the
winch mechanism tube.
Reinstalling The Flat Or Spare Tire
4. Rotate the lug wrench handle clockwise until
the wheel is drawn into place against the
underside of the vehicle. Continue to rotate
until you feel the winch mechanism slip, or
click three or four times. It cannot be
overtightened. Push against the tire several
times to ensure it is firmly in place.
NOTE:
The winch mechanism is designed for use with the
extension tube only. Use of an air wrench or other
power tools is not recommended and can damage
the winch.
R
EINSTALLING
T
HE
J
ACK
A
ND
T
OOLS
1. Tighten the jack all the way down by turning
the jack turn-screw counterclockwise until the
jack is snug.
2. Position the jack and tool bag. Make sure the
lug wrench is under the jack near the jack
turn-screw.
Jack And Tool Bag
3. Secure the tool bag straps to the jack.
Jack And Tools Tied
4. Place the jack and tools in the storage position
holding the jack by the jack turn-screw, slip the
jack and tools under the seat so that the
bottom slot engages into the fastener on the
floor.
NOTE:
Ensure that the jack slides into the front hold down
location.
7
23_DT_TRX_SU_EN_USC_t.book Page 77