RAM TRX 2023, Руководство по функциям

Страница: 29 / 104

STARTING AND OPERATING 27
Proper operation of four-wheel drive vehicles
depends on tires of equal size, type and
circumference on each wheel. Any difference in
tire size can cause damage to the drivetrain.
Because four-wheel drive provides improved
traction, there is a tendency to exceed safe turning
and stopping speeds. Do not go faster than road
conditions permit.
Shifting Procedure
NOTE:

If any of the requirements to select a new
transfer case position have not been met, the
transfer case will not shift. The position
indicator light for the previous position will
remain on and the newly selected position
indicator light will continue to flash until all the
requirements for the selected position have
been met.

If all the requirements to select a new transfer
case position have been met, the current posi -
tion indicator light will turn off, the selected posi -
tion indicator light will flash until the transfer
case completes the shift. When the shift is
complete, the position indicator light for the
selected position will stop flashing and
remain on.
S
ELEC
-S
PEED
C
ONTROL
(SSC)
Selec-Speed Control Button
SSC is intended for off-road driving in 4WD LOW
only. SSC maintains vehicle speed by actively
controlling engine torque and brakes.
NOTE:
For vehicles not equipped with Trailer Reverse
Steering Control (TRSC), your SSC button is located
on the Auxiliary Switch Bank below your radio
screen.
SSC has three states:
1. Off (feature is not enabled and will
not activate)
2. Enabled (feature is enabled and ready but
activation conditions are not met, or driver is
actively overriding with brake or throttle
application)
3. Active (feature is enabled and actively
controlling vehicle speed)
Enabling SSC
SSC is enabled by pushing the SCC button when
the following conditions are met:

The driveline is in 4WD LOW.

The vehicle speed is below 5 mph (8 km/h).

The parking brake is released.

The driver door is closed.

The driver is not applying throttle.
Activating SSC
Once SSC is enabled it will activate automatically
once the following conditions are met:

The driver releases the throttle.

The driver releases the brake.

The transmission is in any selection other
than PARK.

Your vehicle speed is below 20 mph (32 km/h).
4
23_DT_TRX_SU_EN_USC_t.book Page 27