RAM PROMASTER 2021, Руководство пользователя

Страница: 240 / 288

238 SERVICING AND MAINTENANCE
4. Connect the wire and rotate bulb/socket
clockwise into lamp locking it in place.
5. Reinstall the plastic cap and close the cover
on the wheel liner.
Front, Rear Roof Lamps
See below steps to replace:
1. Remove two screw and remove the lamp
assembly.
2. Remove the socket bulb by turning counter -
clockwise.
3. Remove bulb and replace as needed.
4. Reinstall the bulb socket and rotate
clockwise to lock in place.
5. Reinstall lamp.
Rear Tail, Stop, Backup, Turn Signal And Rear
Side Marker Lamps
See below steps to replace:
1. Open rear doors.
2. Remove the seven (7) fasteners from the
rear access cover and remove cover to gain
access to the Tail lamp assembly fasteners.
Rear Access Cover
3. Remove the two (2) 17mm tail light
assembly fasteners.
4. Disconnect the tail light harness connector
and remove tail light assembly from the
vehicle.
5. Remove the tail/stop, turn signal, backup
and rear side marker bulb/socket by
rotating counterclockwise.
6. Remove the bulb and replace as needed.
7. Reinstall bulb/socket and rotate clockwise
to lock in place.
8. Reinstall lamp.
Replacing Interior Bulbs
Cargo Lamp
See below steps to replace:
1. Using a suitable tool, remove either the
lamp above the back door or the sliding
door lamp as needed and disconnect it.
Rear Cargo Lamp Bulb Access
2. Using a suitable tool, pull open the metal
bulb access on the back of the housing.
21_VF_OM_EN_USC_t.book Page 238