
SERVICING AND MAINTENANCE
237
Front Turn Signal/Parking Lamps
See below steps to replace:
1. Remove one retaining screw on the lower
headlamp filler panel. Remove filler panel.
2. Remove two retaining screws on the upper
headlamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the
headlamp housing.
4. Remove two lower retaining screws from
the headlamp housing.
5. Pull Headlamp forward, disconnect the
harness electrical connector and remove
the headlamp assembly from vehicle.
6. Rotate the bulb counterclockwise and
remove.
7. Install the bulb into socket, and rotate bulb/
socket clockwise into lamp locking it in
place.
8. Carefully reinstall headlamp in the same
position on the vehicle, so as not to affect
headlamp aiming.
9. Install the one upper retaining screw on
headlamp housing.
10. Install the two lower retaining screws on
headlamp housing.
11. Carefully reinstall the lower headlamp filler
panel and one retaining screw.
12. Carefully reinstall the upper headlamp filler
panel and two retaining screws.
Daytime Running Lamp (DRL)/Front Side
Marker Lamp
See below steps to replace:
1. Remove one retaining screw on the lower
headlamp filler panel. Remove filler panel.
2. Remove two retaining screws on the upper
headlamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the
headlamp housing.
4. Remove two lower retaining screws from
the headlamp housing.
5. Pull Headlamp forward, disconnect the
harness electrical connector and remove
the headlamp assembly from vehicle.
6. Remove the (DRL), side marker bulb by
pulling straight out.
7. Replace lamp as required and lock in place.
8. Reinstall plastic cap.
9. Carefully reinstall headlamp in the same
position on the vehicle, as not to affect
headlamp aiming.
10. Install the one upper retaining screw on the
headlamp housing.
11. Install the two lower retaining screws on the
headlamp housing.
12. Carefully reinstall the lower headlamp filler
panel and one retaining screw.
13. Carefully reinstall the upper headlamp filler
panel and two retaining screws.
Front Fog Lamps
See below steps to replace:
1. Turn front wheels inboard to access cover
in wheel liner.
2. Open the cover on the front of the wheel
liner.
3. Remove connection and replace the bulb.
8
21_VF_OM_EN_USC_t.book Page 237
Содержание PROMASTER 2021
Страница 44: ...42 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster 21_VF_OM_EN_USC_t book Page 42...
Страница 249: ...SERVICING AND MAINTENANCE 247 8 21_VF_OM_EN_USC_t book Page 247...
Страница 285: ......
Страница 286: ......