![RAM 1500 CLASSIC 2021 Скачать руководство пользователя страница 321](http://html1.mh-extra.com/html/ram/1500-classic-2021/1500-classic-2021_owners-manual_3558743321.webp)
SERVICING AND MAINTENANCE
319
7. Reach into the front wheel house ahead of
the front wheel, remove the fastener, and
lift the cover over the access hole in the
front of the wheel house splash shield.
Access to the rear of the lamp can be gained
through this access hole.
8. Reach through the access hole of the wheel
house splash shield and lift the slide lock
upward far enough to disengage it from the
lock post on the back of the front lamp unit
housing.
Slide Lock
9. Remove the headlamp assembly. Grab the
outboard edge of the lamp and pull it
straight forward to disengage the ball stud
from the plastic grommet.
Headlamp Screw Locations
10. Disconnect the wiring harness connectors
from the bulb socket.
Bulb Location
Bulb Location
11. Replace bulb(s) as necessary.
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened
bulb life will result.
Always use the correct bulb size and type for
replacement. An incorrect bulb size or type
may overheat and cause damage to the
lamp, the bulb socket, or the lamp wiring.
8
21_DS_OM_EN_USC_t.book Page 319