GETTING TO KNOW YOUR VEHICLE
87
Storage Position
The storage position for the bed extender is at
the front of the truck bed which maximizes the
bed cargo area when not in use.
To install the bed divider into the storage
position, perform the same steps as you would
for the divider position, except position the
divider fully forward in the bed against the front
panel.
Storage Position
The outboard ends should be positioned in front
of the cargo tie-down loops.
Cargo Tie Down Loop
SLIDE-IN CAMPERS
C
AMPER
A
PPLICATIONS
Certain truck models are not recommended for
slide-in campers. To determine if your vehicle is
excluded, please refer to the “Consumer
Information Truck-Camper Loading” document
available online at ramtrucks.com. For safety
reasons, follow all instructions in this important
document.
NOTE:
When a cap or pickup camper is installed on a
vehicle, an alternate Center High-Mounted Stop
Light (CHMSL) must be provided.
WARNING!
To avoid inhaling carbon monoxide, which is
deadly, the exhaust system on vehicles
equipped with “Cap or Slide-In Campers”
should extend beyond the overhanging
camper compartment and be free of leaks.
2
21_DS_OM_EN_USC_t.book Page 87
