Rally RE12T38 Скачать руководство пользователя страница 3

3

1. Safety Rules

Safe Operation Practices for Ride-On Mowers

IMPORTANT: 

 THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS.

FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. Training

Read the instructions carefully.  Be familiar with the
controls and the proper use of the equipment.

Never allow children or people unfamiliar with the ins-
tructions to use the lawnmower.  Local regulations may
restrict the age of the operator.

Never mow while people, especially children, or pets are
nearby.

Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.

All drivers should seek and obtain professional and
practical instruction.  Such instruction should empha-
size:

- the need for care and concentration when working

with ride-on machines;

- control of a ride-on machine sliding  on a slope will

not be regained by the application of the brake.

The main reasons for loss of control are:

a) insufficient wheel grip;
b) being driven too fast;
c) inadequate braking;
d) the type of machine is unsuitable for its task;
e) lack of awareness of the effect of ground

conditions,especially slopes;

f) incorrect hitching and load distribution.

II. Preparation

While mowing, always wear substantial footwear and
long trousers.  Do not operate the equipment when
barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown by
the machine.

WARNING - Petrol is highly flammable.

- Store fuel in containers specifically designed for this

purpose.

- Refuel outdoors only and do not smoke while refu-

eling.

- Add fuel before starting the engine.  Never remove

the cap of the fuel tank or add petrol while the engine
is running or when the engine is hot.

- If petrol is spilled, do not attempt to start the engine

but move the machine away from the area of spillage
and avoid creating any source of ignition until petrol
vapors have dissipated.

- Replace all fuel tanks and container caps securely.

Replace faulty silencers.

Before using, always visually inspect to see that the
blades, blade bolts and cutter assembly are not worn or
damaged.  Replace worn or damaged blades and bolts
in sets to preserve balance.

On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.

III. Operation

Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artificial light.

Before attempting to start the engine, disengage all blade
attachment clutches and shift into neutral.

Do not use on slopes of more than 10°.

Remember there is no such thing as a “safe” slope.  Travel
on grass slopes requires particular care.  To guard
against overturning;

- do not stop or start suddenly when going up or

downhill;

- engage clutch slowly, always keep machine in gear,

especially when traveling downhill;

- machine speeds should be kept low on slopes and

during tight turns;

- stay alert for humps and hollows and other hidden

hazards;

- never mow across the face of the slope, unless the

lawnmower is designed for this purpose.

Use care when pulling loads or using heavy equipment.

- Use only approved drawbar hitch points.
- Limit loads to those you can safely control.
- Do not turn sharply.  Use care when reversing.
- Use counterweight(s) or wheel weights when sug-

gested in the instruction handbook.

Watch out for traffic when crossing or near roadways.

Stop the blades from rotating before crossing surfaces
other than grass.

When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.

Never operate the lawnmower with defective guards,
shields or without safety protective devices in place.

Do not change the engine governor settings or overspeed
the engine.  Operating the engine at excessive speed
may increase the hazard of personal injury.

Before leaving the operator’s position:

- disengage the power take-off and lower the attach-

ments;

- change into neutral and set the parking brake;
- stop the engine and remove the key.

Disengage drive to attachments, stop the engine, and
disconnect the spark plug wire(s) or remove the ignition
key

- before cleaning blockages or unclogging chute;
- before checking, cleaning or working on the

lawnmower;

- after striking a foreign object.  Inspect the lawnmower

for damage and make repairs before restarting and
operating the equipment;

- if the machine starts to vibrate abnormally (check

immediately).

Disengage drive to attachments when transporting or not
in use.

Stop the engine and disengage drive to attachment

- before refueling;
- before removing the grass catcher;
- before making height adjustment unless adjust-

ment can be made from the operator’s position.

Eng

Содержание RE12T38





































































Отзывы: