Ralink 11G Series, Руководство пользователя

Страница: 52 / 60

Wireless 54 Mbps PCI Card
50
If you have two or more computers (desktops or laptops) and want to share files and
printers, but no Internet connection, please complete the following instructions. When your
Ad Hoc network is complete it may look similar to this:
(Requirements: Wireless network adapters for all computers in the ad-hoc network.)
To complete this installation, please follow these steps:
1. Install The Wireless 54Mbps PC/PCI Card into your computers.
2. Set the Static IP Address of the wireless adapters.
Note: The IP Address for all computers must be in the same IP Address range, and the Subnet
Mask must be the same for all computers on your network. For example, if the first
computer is assigned an IP Address of 10.0.0.2 with a Subnet Mask of 255.0.0.0, then the
second computer can be assigned an IP Address of 10.0.0.3 with a Subnet Mask of
255.0.0.0, etc.
3. Check the Device Manager to confirm that the wireless adapter is installed correctly. Please
refer to the Networking Basics section in this manual entitled, “Checking the Installation of
the Drivers for the Wireless Adapter.”
4. Check the Wireless Configuration for each wireless adapter. Please refer to the Networking
Basics section in this manual entitled, “Checking the Wireless Configuration.”
5. Learn to share printers and files. Please refer to the Networking Basics section in this
manual entitled, “Adding and Sharing Printers in Windows XP.”
4. An Ad Hoc Network with Internet Sharing
If you have two or more computers (desktops or laptops) and want to share files, printers,
and Internet access using one computer or laptop as an Internet Server, then follow the
instructions below. When you have completed your network, it should look similar to this: