Ralink 11G Series, Руководство пользователя

Страница: 23 / 60

Wireless 54 Mbps PCI Card
21
IP & Proxy Setting
Under the General Setting field, click the Enable IP Setting and Proxy Setting in Profile
click-box. This will allow you to use the IP address and proxy server settings that are
associated with each WLAN profile to be used. If this box is unchecked, the IP address
and proxy server settings made in the Windows networking dialog boxes will be used. If
you check this box, the IP address and proxy server settings that were in use before (the
Windows settings) will be saved. The IP address and proxy server settings you entered
for this WLAN profile will be used for the connection. When you terminate the WLAN link,
the saved IP address and proxy server settings will be restored to their previous values.
Click the Apply button to make the settings current.
You can now make the IP address and proxy server settings required for each of the
WLAN links you want to make.
Click the Configuration tab to open the Configuration page. Select a WLAN link by double-
clicking the link in the Available WLANs field. This will open the Wireless Network
Properties page. Now click on the IP & Proxy Setting button to open the following page.
If your WLAN AP for this WLAN link is configured to use the Dynamic Host Configuration
Protocol (DHCP) to assign IP addresses, subnet masks, default gateway address, and
DNS server address to PCs on your network, you can check the Obtain an IP address
automatically click-box. You can also click the Obtain DNS server address automatically
click-box.
Click on IP & Proxy Setting to set the IP address, Subnet mask, and Default gateway
manually instead of obtaining the IP address automatically through the Dynamic