Raisecom RC904-V35FE1-BL Скачать руководство пользователя страница 2

Страница: 2 / 24

Raisecom Technology Co., Ltd

1. Cautions

Please read the following notices carefully before installing

and using the device, Raisecom does not respond to any loss

that caused by violating safety notices.

RC904-V35FE1-BL provides standard V35 synchronous data

interface that is compliant with ITU norm. V35 cable must be

connected to the device before powered on. To avoid

damaging V35 data interface hot-swap of V35 cable is strictly

forbidden. RC904-V35FE1-BL also provides standard E1 port

that is compliant with ITU-T norm, to avoid damaging E1 port

there must be grounding protection and the voltage between

the two ends shielded layer of coaxial cable cannot be too

high.

RC904-V35FE1-BL is an integrated device that has precise

elements, please avoid violent shakes and impacts, and do not

disassemble or maintain the device yourself. If it is required,

please do it under the guide of our technical staff following in

the steps of anti static. Please contact us if there is any need.

There must be grounding protection for the sake of safety; do

Содержание RC904-V35FE1-BL

























Результаты поиска

Содержание RC904-V35FE1-BL

Отзывы:

Похожие инструкции для RC904-V35FE1-BL

Бренды по названию

Популярные бренды

Raisecom RC904-V35FE1-BL, Руководство пользователя

Результаты поиска

Содержание RC904-V35FE1-BL

Отзывы:

Похожие инструкции для RC904-V35FE1-BL

Бренды по названию

Популярные бренды