Raisecom
Gazelle S3028i (A) Hardware Description
4 Cables
Raisecom Technology Co., Ltd.
13
4
Cables
This chapter describes cables for the Gazelle S3028i, including the following sections:
4.1 Serial interface cable
4.1.1 Introduction
The Gazelle S3028i is delivered with the CBL-RS232-DB9F/RJ45-2m serial interface cable,
which can be connected to the RJ45 Console interface and allows you to log in to the device.
The serial interface cable is used to connect the Console interface of the device and the RS-
232 serial interface of the maintenance console and transmit configuration data. The
maintenance Console implements local debugging and maintenance through the Console
interface.
The serial interface cable is an 8-PIN unshielded cable, with its connectors at two ends as
below:
RJ45 connector: connected to the Console interface of the device
DB9 female connector: connected to the serial interface of the maintenance Console
4.1.2 Appearance
Figure 4-1 shows the RJ45 serial interface cable.