Raisecom
Gazelle S3028i (A) Hardware Description
4 Cables
Raisecom Technology Co., Ltd.
15
4.2 Fiber
4.2.1 Introduction
The Gazelle S3028i supports single-mode or multi-mode fiber, as listed in Table 4-2.
Table 4-2
Fiber connector
Connector
Fiber
SC/PC
2 mm single-mode fiber
2 mm multi-mode fiber
ST/PC
2 mm single-mode fiber
2 mm multi-mode fiber
LC/PC
2 mm single-mode fiber
2 mm multi-mode fiber
Choose the type of fiber connector and fiber length properly as required on site.
4.2.2 Appearance
Figure 4-3 shows the SC/PC fiber connector.
Figure 4-3
SC/PC fiber connector
When connecting or removing the SC/PC optical connector, align the connector with the
optical interface, and do not rotate the fiber. Pay attention to the following points:
Align the head of the fiber jumper with the optical interface and insert the optical fiber
into the interface gently.
To remove the fiber, push the fiber head inwards, and then pull the fiber out.
Figure 4-4 shows the ST/PC fiber connector.
Figure 4-4
ST/PC fiber connector
