E2CF
3D Printer
/ User Manual
Take out the gauge from the
Accessory Kit and insert it between
the nozzle and the platform. Adjust
the nozzle so that the distance
between the nozzle and the printing
platform exactly matches the
thickness of the gauge (about 0.3
mm). Tighten the nozzle screw and
remove the gauge. The other nozzle
is adjusted in the same way.
Follow the steps shown in the figure
on the touch screen to run 9-point
automatic leveling.
After the 9 grid interface automati-
cally closes, the leveling is finished.
0.3 mm feeler gauge
0.3 mm
4
③
②
①
5
N.
Maintenance
28
