E2CF
3D Printer
/ User Manual
H.
Hardware Installation and First Print
X Axis Lock
Z Axis Lock
1
Use hands to remove the Z-axis and
X-axis locks. Please carefully store
the removed locks, so that they can
be installed again and used in subse-
quent transportation.
The top foam contains five power
cords of different standards. Please
use the power cord that conforms to
your current country (or region) and
connect it to the power socket. Turn
on the switch and start the device.
Turn on the power and the printer
will enter the boot process. Your
Raise3D printer will take about 60
seconds to boot. When the touch
screen displays the "Welcome"
window, the printer is ready. Then
you can finish the installation and
first print according to the Setup
guide.
2
3
*For the details of the dry box installation, please refer to the brochure attached to the dry box.
17
