37
US
INSTALLATION
Please note, that when using a swivel base the clearances to side and backwall have
special clearances, see table on page
35.
INSTALLATION OF SWIVEL BASE
INSTALLATION
The stove is available with or without a swivel base. If the stove is delivered with a swivel
base, the swivel base is mounted under the stove. The upper and lower part are held to-
gether and locked with 2 transport screws (thumbscrews). After the stove is installed,
remove the transport screws to free the swivel base.
Remove the front cover, on the front side of the stove before installing, to acces the
swivel base. Mount the front cover again when done.
The swivel base can be installed:
• at 90 degrees (45 degrees on each side)
- (factory default setting)
• at 360 degrees
Installing a 360° swivel base. Remove the
stop screw. The stove can now rotate freely.
The swivel base lock (spring) can be tightened by
loosening the screw to adjust the bracket. Move
the bracket toward the plus symbol and tighten
the screw again.
Transportscrews
