RAIS/attika Q-TEE, Руководство пользователя, Страница: 43 / 60

A-A
B
A
Material:
Remarks:
Bend Tool:
Established:
Designer: Project manager:
Format:
Approved:
Drawing no.: Revision: Project:
Drawing name:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
Change order
Drawing change: Improvement proposal:
Corrections: D M Y
sbv
12-03-2020
A2
8328607
`
1.8
6-30
0-10
`
0.2
`
1°
1000-2000
`
0.15
`
0.3
`
1.2
`
0-5°
> 400
TILLADTE AFVIGELSER FOR VINKELMÅL
50-120 120-400
`
0-10°
`
0.8
400-1000
`
0.5
120-400
`
0-20°
`
0-30°
`
0.3
10-50
30-120
`
0.9
`
0.6
3-6
TILLADTE AFVIGELSER FOR LINIEÆRE MÅL
AFVIGELSE I MM
`
0.1
`
0.1
VINKELAFVIGELSE
KORTESTE SIDE
0.5-3
pr. 100 mm
OV UV
B
A
114
1
2
3
4
5
A-A
B
A
Material:
Remarks:
Bend Tool:
Established:
Designer: Project manager:
Format:
Approved:
Drawing no.: Revision: Project:
Drawing name:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
Change order
Drawing change: Improvement proposal:
Corrections: D M Y
sbv
12-03-2020
A2
8328607
`
1.8
6-30
0-10
`
0.2
`
1°
1000-2000
`
0.15
`
0.3
`
1.2
`
0-5°
> 400
TILLADTE AFVIGELSER FOR VINKELMÅL
50-120 120-400
`
0-10°
`
0.8
400-1000
`
0.5
120-400
`
0-20°
`
0-30°
`
0.3
10-50
30-120
`
0.9
`
0.6
3-6
TILLADTE AFVIGELSER FOR LINIEÆRE MÅL
AFVIGELSE I MM
`
0.1
`
0.1
VINKELAFVIGELSE
KORTESTE SIDE
0.5-3
pr. 100 mm
OV UV
B
A
114
1
2
3
4
5
GB - 42
GBGB
The wall bracket (1) is centered in relation to the wall socket in the wall or at the desired height above the floor.
The holes are marked through the holes in the bracket.
The bracket is fastened with suitable screws for the wall type. The upper edge of the bracket must be horizontal.
Plastic Rawplugs must not be used. Bolts and other fastening material are not included. The flue pipe (2) with gasket is mounted on the
back of the oven instead of the blind cover with three M6 screws.
The oven is lifted onto the wall bracket and pushed into place against the wall.
the two M5 bolts are tightened again.
Check that the top plate of the oven is horizontal. if necessary, lift the oven off the wall and adjust the
bracket.
Distance from top plate to center of rear outlet 114 mm