4
Introduction
The CC-3000 is a data logger and computer interface for Rainwise MK-III
weather stations. There are several variants of the CC-3000, make sure you
know which one you have and follow its specific instructions. In most in-
stances the CC-3000 will be used with a third party software programs. In
these instances, you will need to use this guide to install and connect the CC-
3000 to you computer. You will need the software instructions for operational
instructions.
Minimum System Requirements
The CC-3000 will communicate with any host system that supports the FTDI
USB serial bridge. Using a virtual com port (VCP) driver the CC-3000 will
appear as a serial communications port on the host system. The VCP drivers
were written and supplied by FTDI.
VCP Specifications
Port:
USB 2.0 Full Speed
Interface IC:
FT232R
Baud rate:
115200 bps
Parity:
None
Data bits:
8
Stop bits :
1
Handshaking:
None
The CC-3000R is equipped with both RS-232 and RS-485 serial ports. This
version is used when only a serial interface is available or when used with cus-
tom firmware (software in the C-3000R). Only one port may be used at a time.
RS-232 Specifications
Baud rate:
115200 bps
Parity:
None
Data bits:
8
Stop bits :
1
Handshaking:
None (DTR & DSR available but not used)
RS-485/422 Specifications
Baud rate:
115200 bps
Parity:
None
Data bits:
8
Stop bits :
1
Interface mode: 2-wire half duplex
Содержание CC-3000
Страница 12: ...12...
