RainSoft EC5 Series, Руководство пользователя

Страница: 13 / 34

13
4. Flush the Hot Water Heater
• Run hot water in the bathtub until the water tests soft.
5. Add Salt to Brine Tank
Salt Recommendations
RainSoft Water conditioners use water softener Block Salt, Solar
Salt (Pellet), or Potassium Chloride. Your Dealer will provide a
recommended type of salt to use. Go to the Main Menu, >
Configure Settings, >Salt Settings, to change your Salt Type
(Sodium or Potassium) and Salt Form (Pellet or Block)
Adding Salt to your Brine Tank
1 ) Fill your Salt Tank with Block Salt, Solar Salt (Pellet) or
Potassium Chloride. The RainSoft standard brine tank can hold a
max of 250 lbs. [113kg] or LEVEL 5.0 of Pellet form Salt and 200
lbs. [90kg] or Level 4.0 of Block form Salt.
• Solar Salt and Potassium Chloride generally come in 40 lbs. Pellet
Form Bags. Fill tank with pellets by empting contents right into
center of brine tank.
• Block Salt comes in 25 lbs. blocks or 50 lbs. blocks. See Block
Stacking Figures on page 14 for correct and incorrect stacking
of block salt.
2 ) On your EC5, press any button from the home screen to enter
the Main Menu, then select >SALT LEVEL, Press Enter or Right
Arrow button. Using the Up and Down Arrows, set the Salt Level
to the level of salt that is filled in the brine tank. You can
reference the weight of salt you entered for more precise
entering of amount of salt used. Level of 1.0 is equal to 50 lbs.
22kg] of salt.
3) Press Enter Button to save new salt level and exit salt level
screen. Press the Left Arrow button to exit the Main Menu and
return to the Home Screen.
Note: Exiting Salt Level screen with the Left Arrow button will
NOT
save new salt settings .
!
Important Note: It is important
to maintain at least 15 lbs. to 30
lbs. of salt in your brine tank to
correctly regenerate your
System and to continue to enjoy
soft water. LOW SALT ALERTS
will activate for salt levels
under 30 lbs.
!
Recommendations: If choosing to
use both Block and Pellet form of
salt when filling your brine tank,
we recommend you maintain your
settings on Pellet Form. We do not
recommend this method of filling
your brine tank for system sizes of
EC5 150 and higher. The total
volume of salt in the full brine
tank will not allow enough room
for water to make the appropriate
amount of brine solution to
regenerate your system fully.