RainSoft EC5 Series, Инструкция по установке и обслуживанию

Страница: 35 / 44

35
Replacing the Seals and Spacers
• Remove the control head; see instructions page on 33.
• Remove the screws and end plug assembly (
see Figure 21
).
• Remove the seals and spacers with your fingers (
see Figure 21
). If a
spacer is difficult to remove, use a spacer removal tool.
• Inspect the inside of the valve for foreign debris.
• Apply a silicone-based lubricant to the seals before installation.
• Install the new seals and spacers with your fingers (
see Figure 21
). Please
note that the bottom spacer is different and must be installed first. If
you have difficulty inserting the spacers to a level position, use the seal
stuffer tool.
• Reverse the procedure for reassembly. To ensure alignment with the
cam shaft, make sure the piston is all the way up (
see Figure 18 on
page 33)
.
SEAL
COUNT 5
MIDDLE SPACER
COUNT 4
END SPACER
COUNT 1
Figure 21