RAINSMART RainSmart, Руководство пользователя

Страница: 5 / 22

RAINSMART
TM
‘PUMP BOX’ INSTALLATION GUIDE
What is it?
The RainSmart
TM
‘Pump Box’ is basically your typical RainSmart
TM
+ Pump +
Pump Box all in one, neatly and fully assembled for the ease of you, the
consumer. The
RainSmart
TM
‘Pump Box’ is used as a switch between Mains and
precious Tank water.
How it works?
The RainSmart
TM
‘Pump Box’ comes fully assembled and works like a typical
RainSmart
TM
. The Float Switch provided senses when there is and is not
sufficient water in the Tank to supply your Amenities. If there is water in the
Tank, the Motorised Ball Valve (blue box as depicted above) closes and Tank
water is pumped and directed to your Amenities. If there is no water in the Tank,
the Motorised Ball Valve opens allowing Mains water to pass through the Dual
Check Valve (gold valve beside Motorised Ball Valve as depicted above) to the
Amenities. Mains water cannot pass through the Pump as a check valve in the
Pumps press head prevents this from occurring.
What you need?
Installing the
RainSmart
TM
‘Pump Box’ is as easy as 4 simple connections.
Connect the Tank to the Pump. Connect the Mains line to the Dual Check Valve.
Connect the Amenities line to the T-piece. Lastly, plug the
RainSmart
TM
controller into a Mains power outlet. Please note: The installation of the
RainSmart
TM
‘Pump Box’ must be carried out by a licensed plumber . However,
a licensed electrician is not required. (To see Float Retention Gland installation
and or setting Reserve Levels, refer to ‘5. INSTALLING FLOAT SWITCH’).