Revision 1 - Printed
April 10, 1997
15" Plus Manual
22
NOTE: Gel Position after Exiting Test Modes
Upon exiting any of the test modes and selecting one of the operational modes between
0 and 7, the PlusCard will check for a valid DMX input. If none is detected, the gel position
will remain at the last valid position before entering test mode. If a valid level is detected
move the gel at medium speed until the position equals to the input position, from when
it will track the input as per the mode, frame, and address settings. This will give a smooth
crossfade to position avoiding any undue stress on the scrolls.
As the Rainbow Colour Changer also has a permanent memory, the position memory
is retained on power down. On power up, the PlusCard will go to either the value on
power down (No DMX input), or will move the gel at medium speed to the new DMX
input value.
RAINBOW SETUP / TEST MODES ...CONT
