Revision 1 - Printed
April 10, 1997
15" Plus Manual
21
Mode E - Percentage Level Set using Address Selector
Selects an output level between 01 and 99% irrespective of the control input. This can
be used to trim the scroll or to compare with a console output. The percentage level is
selected on the Address Selectors and the speed is controlled from the Frame selector
as follows:
Address Level Frame Selector: Speed:
01 01 % 0 and 4-E Stop
nn nn % 1 Slow
99 99 % 2 and F Medium
3 Fast
Example: Slow movement to 50%
Mode F - 00% Output for Zero Set / Trimming
Fades the output level to 00% irrespective of control input. This can be used when
loading filter in to the colour changer without the need for a control console. The Frame
selector is used to control the speed of the crossfade as follows:
Frame Selector: Speed:
0 and 4-E Stop
1 Slow
2and F Medium
3 Fast
Example: Medium fade to 00%
RAINBOW SETUP / TEST MODES ...CONT
