Revision 1 - Printed
April 10, 1997
15" Plus Manual
20
Mode C - Micro Set of Gel Position
This allows the setting of the gel position using 12 bit accuracy. This can be used to check
the Frame tables or set accurate positioning. The 12 bit accuracy allows the scroll to be
divided into 4096 steps. These levels are used to set frame by frame positions and for
the ultra-smooth slow crossfades using on-board speed control. The filter movement is
at a preset medium speed.
The levels are set in hexadecimal using the Address and Frames switches as follows:
Address (0 - 255
DEC
)= Most significant 8 bits of level = Coarse
Frame (0 - F
HEX
) = Least significant 4 bits of level = Fine
Selection of Position ADE
HEX
(2782
DEC
)
Highest 8 bits = AD
HEX
= 173
DEC
= Address Setting
Lowest 4 bits = E
HEX
= Frames
Mode D - 100% Output for Loading/Trimming
Fades the output level to 100% irrespective of control input. This can be used when
loading and trimming the colour changers on the bench to avoid the need for a DMX
controller. The speed of the fade is controlled by the Frames selector as follows:
Frame Selector: Speed:
0 and 4-E Stop
1 Slow
2 and F Medium
3 Fast
Example: Slow fade to 100%
RAINBOW SETUP / TEST MODES ...CONT
