Rain Bird WS-PRO2, Инструкция по установке, эксплуатации, техническому обслуживанию и устранению неисправностей

Страница: 98 / 113

FIGURE C-4. Strut clamps in brackets
3. Place the bottom strut clamp and bracket approximately 3 m (1 ft) below the top clamp.
This clamp is installed with the hook side down. The bracket might have to be moved a little
to accept the enclosure bracketing, so don’t tighten the bracket yet.
FIGURE C-5 (p. 94)
shows the top and bottom brackets correctly positioned on the WS-PRO2 pole.
FIGURE C-5. Both strut clamps and brackets on WS-PRO2 pole
4. Hook the enclosure on the top bracket as shown in FIGURE C-6 (p. 95).
Appendix C. PS24 24 Ah power supply with 10 x 12 inch enclosure 94