Rain Bird Pro, Инструкция по установке, обслуживанию и устранению неисправностей, Страница: 28 / 80

Weather Station - Model “PRO”
Nov., 2001 Page
18
Model “PRO”- Weather Station
Cozz GT27145B
7.0 INSTRUMENTATION ENCLOSURE INSTALLATION:
GENERAL:
The Model PRO weather station
datalogger, power supply, sensor
connection panel, communications
devices and data retrieval peripherals are
mounted in the ET Enclosure with the
sensors themselves mounted on a cross-
arm, which mounts to the top of the
Enclosure.
MOUNTING
ET ENCLOSURE TO THE
TOWER
enclosure brackets down the tower,
from the top of the tower.
Position the Enclosure so that the top of
the enclosure is even with the top of the
tower and on the north side of the tower
(for northern hemisphere). Tighten the
bolts, on the clamps, to secure the
enclosure to the tower. DO NOT over-
tighten the bolts since doing so may
damage the tower or the enclosure.
Refer to FIGURE 8 below
Mount the Enclosure to the top of
the weather station tower, by sliding the
FIGURE 8 - MOUNTING ENCLOSURE ON TOWER