Installation
ENG
ESP-Me Controller
13
Station Expansion Modules
Optional Station Modules are installed in the empty
slots to the right of the base module to increase the
station capacity up to 22 stations.
c
b
NOTE:
6-Station module is compatible only with
the ESP-Me. They are not backwards compatible
with the previous ESP-M vintage controller.
c
b
NOTE:
For ideal station sequencing, it is rec-
ommended that a 6-Station module always be
installed in Bay 2. For more details see the Station
Numbering section.
VT MV COM
3-STATION
(
ESPSM3)
6-STATION
(
ESPSM6)
Expansion Modules
(sold separately)
Base Module
(included)
Install Modules
A
Verify the securing lever on the module is in the
unlocked position (slide to the left).
B
Place the module under the desired slot between
the plastic rails.
C
Push the module up into the slot until secure.
D
Slide the securing lever to the locked position
(slide to the right).
c
e
REPEAT
for additional modules.
c
b
NOTE:
Modules can be installed or removed with
OR without AC power connected. They are con-
sidered “hot-swappable”.
BC
D
Содержание ESP-Me
Страница 139: ...This page intentionally left blank...