Rain Bird ESP-LXME, Инструкция по установке, программированию и эксплуатации, Страница: 44 / 116

38 ESP-LXME Controller
Weather Sensor
A weather sensor is not required for the ESP-LXME controller, but
it can increase functionality by allowing you to prevent or pause
irrigation based on changing weather conditions.
The ESP-LXME supports one local weather sensor, via a wireless or
wired connection to the LXME Controller base module.
Local Weather Sensor Types
Five types of local weather sensors are supported:
Sensor Types
Type Action
Rain Prevent
Wind Pause
Freeze Pause
Soil Moisture Prevent
Custom Pause Pause
Custom Prevent Prevent
Custom Pause Sensors
When a weather condition becomes true, a Custom Pause sensor will
stop irrigation and also stop the irrigation timer. When the condition
becomes false again, irrigation will start exactly where it left off. For
example, if a station is set to irrigate for 20 minutes but is shut down
by a Pause sensor after only 5 minutes; when the weather condition
becomes false again and after Resume, that station will receive the full
remaining 15 minutes of irrigation left on the timer.
Custom Prevent Sensors
When a weather condition becomes true, a Custom Prevent sensor
will stop irrigation but allow the irrigation timer to continue to run.
When the condition becomes false again, irrigation will resume at the
same time had the weather condition never occurred. For example, if
a station is set to irrigate for 20 minutes but is shut down by a Prevent
sensor after only 5 minutes, if the condition becomes false again after
10 minutes then that station will only receive the remaining 5 minutes
of irrigation left on the timer.