Rain Bird ESP-LXME, Инструкция по установке, программированию и эксплуатации, Страница: 42 / 116

36 ESP-LXME Controller
Water Windows
Used to specify certain times of the day/night when irrigation is
allowed.
Otherwise watering is not allowed outside these “Water Windows”. This
is helpful to comply with local regulations which may prohibit irrigation
during certain hours.
b d
CAUTION:
Be sure a Water Window is sufficient to allow irrigation
programs to run completely. Irrigation scheduled outside the
Water Window will not run but will resume when the Water
Window opens again. This can cause irrigation programs to “stack”
and eventually create an alarm condition if the controller stacks 8
or more programs.
b b
NOTE:
Water Windows can be scheduled to cross midnight. For
example, a Water Window can start at 10:00 PM and continue until
4:00 AM the next morning. Be sure your Watering Start Times are
set to occur within the Water Window. See Section B, Set Watering
Start Times for more details.
b g
Turn the controller dial to Delay Watering.
A
The Delay Watering screen appears. Press the Down Arrow button
to select PGM Water Window; then press Next.
B
The Water Window screen appears. Press the + and – buttons to
set the time when the Watering Window opens; then press Next.
b l
Press and HOLD buttons to accelerate settings for hours and
minutes.
1 2
C
Press the + and – buttons to set the time when the Watering
Window closes. As you adjust the close time, the duration of your
Water Window calculates automatically.
b b
NOTE:
To clear a previously set Water Window, press the + and
– buttons to set both the Open and Close times to OFF (between
11:59 and 12:00 AM).
D
To set another program, change the Program Select switch to the
desired program; a confirmation appears.
3 4
b e
Repeat this process to set or clear Water Windows for other
programs as desired.