Rain Bird ESP-LXME, Инструкция по установке, программированию и эксплуатации, Страница: 112 / 116

106 ESP-LXME Controller
G
Once wiring is completed, fill top of conduit with waterproof
caulking to prevent insect intrusion into the controller cabinet.
7
Connect Local Weather Sensor
The ESP-LXME can accept input from a single weather sensor wired
directly to the controller or through a wireless receiver.
A local weather sensor can be bypassed with the sensor bypass switch
on the controller front panel.
To Enable a Local Weather Sensor:
A
On the controller front panel, slide the Weather Sensor switch to
Active.
a
b b
NOTE: Follow the sensor manufacturer’s instructions to correctly
install and make wire connections to the sensor. Ensure the sensor
installation is in compliance with all local codes.