3
ESP-LXD Controller
Sample Programming Guide
Information (1)
A
Enter custom Program Names for your
programs in these fields.
B
Enter Days To Water for each program:
For Custom cycle, check the
specific days of the week to
include for irrigation.
For Cyclical schedule, enter the
cycle period. For example, a “3”
DayCycle indicates irrigation will
occur every third day.
For Odd/Even day watering, check
Odd, Even, or Odd 31.
C
Enter Watering Start Time(s). You may
enter up to eight start times for each
program, but only one start time is
needed for a program to run. Circle
either “am” or “pm”.
D
Enter the Seasonal Adjust by Month
percentages (if you are using them).
E
Check “ON” in the Monthly Seasonal
Adjust row for each program that will
use the monthly percentages.
F
Enter the Seasonal Adjust by Program
percentage (if you are using it). The
Seasonal Adjust for sample Program
A is set to 80%, and the Monthly
Seasonal Adjust box is left unchecked.
G
Enter the Station Delay for each
program (if desired). In the sample,
Program A has a one-minute delay
between valves. When valve 1 ends,
the controller waits one minute before
starting valve 2. There will also be a
one-minute delay between valve 2
and valve 3, etc. A station delay setting
applies to all programs.
H
Enter the Maximum Number of
SimulStations allowed per program.
In the sample, Program A is allowed to
run a maximum number of 4 programs
simultaneously.
I
Enter the Water Window Start and End
Time(s) for each program (if you’re
using them). Circle either “am” or “pm”.
Turf
Shrub
3
10:00
11:45
1:00
2:15
4:30
5:30
80
X
X
X
55
60
70
75
85
90
100
100
90
85
75
65
1 min
4
10:00
6:00
X
X
X X X
1
2
3
4
6
5
8
9
7
Содержание ESP-LXD
Страница 1: ...ESP LXD Controller Programming Guide...
