2
ESP-LXD Controller
Apply Decoder Address Labels
Before you begin programming, apply your field decoder barcode
labels to the appropriate fields on the Programming Guide.
A
Carefully peel the station, master valve, flow or weather sensor
sensor decoder barcode label off of the decoder.
1
B
Apply the decoder address labels in the appropriate fields on the
Programming Guide.
2
Repeat this process to apply additional barcode labels to the
programming chart.
NOTE:
An optional Programming Backup Cartridge (PBC) is
available for the ESP-LXD controller, which allows you to create
and Restore multiple Backups of irrigation programs. With a PBC
cartridge installed, you can also set up Field Decoder addresses
by using a barcode scanning pen to read the removable barcode
labels attached to Rain Bird’s field decoders. See Section E of the
ESP-LXD Controller Installation, Programming and Operation
Guide for more details. Or see page 26 of this Programming Guide
for more details on setting up a barcode scanning pen.
Fill Out Programming Guide
Before you begin programming, fill out the Programming Guide.
Sample Programming information is shown on the following
pages.
C
Enter information about your system hardware and settings in the
appropriate fields on the Programming Guide.
3
Содержание ESP-LXD
Страница 1: ...ESP LXD Controller Programming Guide...